Home > Shop By Vehicle > Kia > Kia Forte Accessories > Kia Forte 2010 - 2013 >

Kia Forte Sedan Chrome Pillar Post Trim, 4pc 2010 - 2013

Kia Forte Chrome Pillar Post Trim, 4pc 2010, 2011, 2012, 2013

You Pay: $80.00

Availability:: Usually Ships in 2 to 3 Business Days
Product Code:: PP10810

Description

Installation Info

Kia Forte Chrome Pillar Post Trim, 4pc 2010 - 2013

Easy installation! Installs directly over your vehicle's existing surface. Cut to perfection & Polished to a Mirror Shine.

This is a 4-piece pillar post trim set and is made from premium stainless steel and polished for a bright chrome mirror finish. The trim comes with 3M adhesive backing and is laser-cut for a perfect factory fit. All you need to do for simple installation is clean the vehicle's surface, remove the protective 3M adhesive liner and stick. Our chrome license plate bezel requires no drilling or cutting.

Pillar Post Trim Features:

Chrome pillar post trim from ShopSAR.com features beveled edges that are rolled and smooth for a flush factory look.
Gives your car a high end model, chrome look.
Uses pre-applied 3M adhesive for simple installation.
Matches your existing factory and aftermarket chrome trim.
Laser cut for an exact fit.
Made to stay applied and brilliant for the life of your vehicle.
Made from highest quality stainless steel with smooth mirror polished finish.
Made in USA.

Kia Forte Chrome Pillar Post Trim

3M Auto Adhesive

PLEASE READ BEFORE INSTALLATION

Congratulations on purchasing a ShopSAR.com Pillar Post kit. Manufactured from 304-grade stainless steel and polished to a mirror finish, this set will enhance the beauty of your vehicle and remain rust free. This set includes the following:

1- Right Front Pillar Trim (A)
1- Left Front Pillar Trim (A)
1- Right Rear Pillar Trim (B)
1- Left Rear Pillar Trim (B)
1- Right Rear-Rear Pillar Trim (C) (included w/6pc. set)
1- Left Rear-Rear Pillar Trim (C) (included w/6pc. set)

Step 1

Please take a few moments and carefully inspect all pillar trim pieces to insure that they are completely free from defects and damage. Peel back the white protective liner in order to thoroughly inspect. Carefully hold each piece in place on your vehicle in order to familiarize yourself with each part’s specific location, position and proper fit. For proper adhesion, the surface must be dry and the vehicle and trim temperature must be above 65 degrees. Clean the vehicle’s surface on and around the designated installation area. Do not remove the “Red-3M” protective liner until instructed to do so.

Please Note: Under no circumstances will credits or refunds be issued for installed parts and/or parts that have had the “Red-3M” protective liner removed.

Step 2

Position the pillar trim in the exact finished location and mark the surface of the trim and the vehicle using masking tape. Mark the tape with a soft marker using hash marks to designate the part placement for top, bottom, and side to side. Now, carefully remove the “Red-3M” protective liner and install the trim into place using the hash marks as your guide. Complete the installation by pressing down with a soft cloth across the trim moving top to bottom. Repeat installation procedure for all pieces.

Please Note: Once the adhesive backing makes contact to the vehicles surface, installation cannot be reversed. Attempting to lift the trim from the surface will cause damage to the trim.

Pillar Trim Diagram

TECH-LINE 1-888-490-7727

Available Monday-Friday 9am-5pm EST

Features

Made in the USA!
High Quality Polished 26 gauge - 304 Stainless Steel.
3M Automotive-Grade Acrylic Foam tape will hold for a lifetime without causing any damage to the surface of the vehicle.

Kia Forte Sedan Chrome Pillar Post Trim, 4pc 2010 - 2013

Kia Forte Chrome Pillar Post Trim, 4pc 2010 - 2013

Easy installation! Installs directly over your vehicle's existing surface. Cut to perfection & Polished to a Mirror Shine.

Step 1

Step 2

COMPANY

ACCOUNT

SHOPPING